Installation Options; Tabletop To Wall-Mount; Installation; Wall-Mount To Tabletop - AT&T CL84367 Complete User's Manual

Getting started

Installation options

The telephone base comes with a mount bracket set for tabletop use. If
you want to mount your telephone on a wall, rotate the mount bracket
down so the telephone can connect with a standard dual-stud telephone
wall-mounting plate. If you do not have this mounting plate, you can purchase
one from many hardware or consumer electronics retailers. You might need a
professional to install the mounting plate.
Tabletop to wall-mount installation
To install the telephone base in the wall-mount position, make sure that you
first unplug the telephone line cord and power adapter from the telephone
wall jack and power outlet.
1. Pull the integrated wall-mount bracket and release it from the tabletop
orientation, as shown below. Rotate it down into wall-mount position and
then push it into the telephone base until it clicks into place.
Use four fingers to
press and release
the wall-mount
bracket.
Pull the middle of
the wall-mount
bracket to release.
Rear view
-OR-
Rear view
Wall-mount
14