Getting started
Telephone base and charger installation
Install the telephone base and charger, as shown below.
The telephone base is ready for tabletop use.
Telephone base installation
Plug the large end of the
telephone base power adapter
into a power outlet not
controlled by a wall switch.
Plug the small end of the
telephone base power
adapter into the power
adapter jack on the back
of the telephone base.
Plug the other end of the telephone
line cord into the telephone jack on
the back of the telephone base.
Plug one end of the
telephone line cord into a
telephone jack or a DSL filter.
If you have DSL
high-speed Internet
service, a DSL filter (not
included) is required.
11