Enabling Ilmi Management; Configuring Oam Retry; Enabling Oam Loopback Cell Generation And Management - Cisco 10000 Series Configuration Manual

Line Card Commands

Enabling ILMI Management

Use the ilmi manage command in PVC configuration mode or VC-class configuration mode to enable
ILMI management on an ATM PVC. This command changes the convergence of higher-level protocols
based on link-state changes.
ilmi manage
no ilmi manage
Use the no form of this command to disable ILMI management.
The following example shows how to enable ILMI management on an ATM PVC:
Router(config)# interface atm 5/0/0
Router(config-if)# pvc 0/105
Router(config-if-atm-vc)# ilmi manage

Configuring OAM Retry

Use the oam retry command in PVC configuration mode or VC-class configuration mode to configure
OAM retry.
oam retry up_value [down_value frequency]
no oam retry up_value [down_value frequency]
Where:
•
•
•
Use the no form of this command to return OAM retry to its default values.
The following example shows how to configure OAM retry for an ATM PVC:
Router(config)# interface atm 5/0/0
Router(config-if)# pvc 0/105
Router(config-if-atm-vc)# oam retry 10 10 5

Enabling OAM Loopback Cell Generation and Management

To enable end-to-end F5 OAM loopback cell generation and OAM management for an ATM PVC or VC
class, use the oam-pvc command in PVC configuration mode or VC-class configuration mode.
oam-pvc [manage] [frequency]
no oam-pvc [manage] [frequency]
Where:
•
Cisco 10000 Series Router Line Card Configuaration Guide
2-20
up_value is a number from 1 to 600 that represents the OAM retry count before declaring that a VC
is up.
The default is 3 retries.
down_value is a number from 1 to 600 that represents the OAM retry count before declaring a VC
is down.
The default is 5 retries.
frequency is a number from 1 to 1000 that represents the OAM retry polling frequency, in seconds.
The default is 1 second.
manage is an optional keyword that brings down the interface or subinterface if the PVC loopback
fails.
Chapter 2 8-Port E3/DS3 ATM Line Card Configuration
OL-8834-04