Software Support - Cisco 10000 Series Configuration Manual

24-Port Channelized E1/T1 Line Card
Configuration
This chapter describes the procedures for configuring the Cisco 10000 series 24-Port Channelized E1/T1
line card, hereafter known as the 24-Port Channelized E1/T1 line card.
The 24-Port Channelized E1/T1 line card provides Cisco 10000 routers with 24 copper channelized or
unchannelized interface ports that you can configure as E1 or T1 interfaces.
This chapter contains the following sections:
•
•
•
•
•

Software Support

Table 5-1
Channelized E1/T1 line card.
Table 5-1
Required PRE
PRE1
PRE2
OL-8834-04
Software Support, page 5-1
Commands and Default Values, page 5-2
Configuration Task Overview, page 5-6
Command Descriptions, page 5-12
Controller Configuration Commands, page 5-17
shows the minimum Cisco IOS release on each release train that supports the 24-Port
24-Port Channelized E1/T1 Line Card Software Support
Minimum Cisco IOS Releases
Cisco IOS Release 12.0(22)S and later releases of Cisco IOS Release 12.0S
Cisco IOS Release 12.2(15)BX and later releases of Cisco IOS Release 12.2BX
Cisco IOS Release 12.3(7)XI and later releases of Cisco IOS 12.3XI
Cisco IOS Release 12.2(28)SB and later releases of Cisco IOS 12.2SB
C H A P T E R
Cisco 10000 Series Router Line Card Configuaration Guide
5
5-1