Cisco 10000 Series Configuration Manual page 187

Chapter 7 4-Port Channelized OC-3/STM-1 Line Card Configuration
Table 7-2
Interface Type
STS-1,
over DS3/T3
STS-1,
over DS3/T3,
channelized to DS1
STS-1,
over subrated DS3/T3
STS-1,
over VT1.5,
channelized to DS1
STS-1,
over VT2,
channelized to E1
SDH Channelization
The 4-Port Channelized OC-3/STM-1 line card supports the following SDH channelization modes:
•
•
•
•
•
•
Table 7-3
SDH-framed controller on the 4-Port Channelized OC-3/STM-1 line card.
Table 7-3
Interface Type
STM-4,
over STM-1
over AU-3,
over DS3/T3
STM-4,
over STM-1
over AU-3,
over a subrated DS3/T3
OL-8834-04
SONET Interface Examples for a SONET-Framed Controller
Syntax
Router(config)# interface serial
<slot>/<subslot>/<port>.<T3#>
Router(config)# interface serial
<slot>/<subslot>/<port>.<T3#>:[chan]
Router(config)# interface serial
<slot>/<subslot>/<port>.<T3#>
Router(config)# interface serial
<slot>/<subslot>/<port>.<VT#>:[chan]
Router(config)# interface serial
<slot>/<subslot>/<port>.<VT#>:[chan]
STM-1 > AU-3 > DS3/T3
STM-1 > AU-3 > DS3/T3 > DS3 subrate
STM-1 > AU-3 > TUG-2 > C-11 > DS1/T1
STM-1 > AU-3 > TUG-2 > C-12 > E1
STM-1 > AU-4 > TUG-3 > TUG-2 > C-11 > DS1/T1
STM-1 > AU-4 > TUG-3 > TUG-2 > C-12 > E1
shows serial interface examples for SDH channelizations on a previously-configured
SDH Interface Examples for an SDH-Framed Controller
Syntax
Router(config)# interface serial
<slot>/<subslot>/<port>.<AU-3#>/<T3#>
Router(config)# interface serial
<slot>/<subslot>/<port>.<AU-3#>/<T3#>
Cisco 10000 Series Router Line Card Configuaration Guide
SDH Channelization
7-3