Software Support - Cisco 10000 Series Configuration Manual

4-Port Channelized T3 Half-Height Line Card
Configuration
This chapter describes the Cisco 10000 series 4-Port Channelized T3 Half-Height line card, hereafter
known as the 4-Port Channelized T3 Half-Height line card.
The 4-Port Channelized T3 Half-Height line card provides the Cisco 10000 router with four DS3 ports of
high-density T3 service (eight T3 ports per slot).
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•

Software Support

Table 4-1
OC-3/STM-1 ATM line card.
Table 4-1
Required PRE
PRE2
OL-8834-04
Software Support, page 4-1
Feature Overview, page 4-2
Default Values, page 4-3
Interface Syntax, page 4-4
Interface Configuration Sample, page 4-4
Unchannelized T3 Commands, page 4-6
Channelized T3 Commands, page 4-12
Channel-Group Command for DS0 Time Slots and T1s, page 4-17
Channelized T1 Commands, page 4-19
High Availability Using Line Card Redundancy, page 4-24
Command Reference, page 4-31
shows the minimum Cisco IOS release on each release train that supports the 4-Port
4-Port OC-3/STM-1 ATM Line Card Software Support
Minimum Cisco IOS Releases
Cisco IOS Release 12.2(28)SB and later releases of Cisco IOS 12.2SB
C H A P T E R
Cisco 10000 Series Router Line Card Configuaration Guide
4
4-1