Configuration Task Overview - Cisco 10000 Series Configuration Manual

Router line card
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Configuration Task Overview

The dsx3 controller designation is a generic term that refers to both E3 and T3 type interfaces. A dsx3
Note
interface controls the configuration and management of DS3 channels and characteristics.
Table 15-3
router 8-slot chassis.
Table 15-3
Configuration
Controller
Interface T3 (DS3)
Interface E3
Table 15-4
router 5-slot chassis.
Table 15-4
Configuration
Controller
Interface T3 (DS3)
Interface E3
Configuration Task Overview
You can configure each port of the 8-Port Unchannelized E3/T3 line card as a full-rate or subrate
unchannelized E3 or T3 interface.
Subrate unchannelized interfaces use specific vendor DSU proprietary formats that limit interface bit
Note
rates to less than full-rate on an E3 or T3 serial interface line.
To configure an 8-Port Unchannelized E3/T3 line card interface:
1.
2.
3.
4.
Note
Cisco 10000 Series Router Line Card Configuaration Guide
15-4
specifies the 8-Port Unchannelized E3/T3 line card interface syntax for the Cisco 10008
8-Port Unchannelized E3/T3 Line Card Interface Syntax for the Cisco 10008 Chassis
Command
controller dsx3 slot/0/port
serialslot/0/port
serialslot/0/port
specifies the 8-Port Unchannelized E3/T3 line card interface syntax for the Cisco 10005
8-Port Unchannelized E3/T3 Line Card Interface Syntax for the Cisco 10005 Chassis
Command
controller dsx3 slot/0/port
serialslot/0/port
serialslot/0/port
Designate a port as a controller.
Configure the controller parameters and save the configuration to NVRAM.
Create a serial interface.
Specify the interface parameters for the interface and save the configuration to NVRAM.
Each time you change a port mode (from T3 to E3, or E3 to T3), the running configuration of
the controller and interface of the changed port mode is erased. If you want to keep a
configuration, you must save it before you change its mode.
Chapter 15
8-Port Unchannelized E3/T3 Line Card Configuration
Slot
1 to 8/
1 to 8/
1 to 8/
Slot
1 to 5/
1 to 5/
1 to 5/
Subslot
Port Number
0/
0 to 7
0/
0 to 7
0/
0 to 7
Subslot
Port Number
0/
0 to 7
0/
0 to 7
0/
0 to 7
OL-8834-04

Advertisement

Table of Contents
loading

Table of Contents