1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. LW720
  6. Manual

Christie LW720 Manual

Hide thumbs Also See for LW720:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
LX750/LW650/LS+700/LW720
U S E R M A N U A L - O P E R A T I N G G U I D E
020-000159-02

Advertisement

Table of Contents
loading

Related Manuals for Christie LW720

Summary of Contents for Christie LW720

  • Page 1 LX750/LW650/LS+700/LW720 U S E R M A N U A L - O P E R A T I N G G U I D E 020-000159-02...

  • Page 2: About This Manual

    • Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other countries and areas. All other trademarks are the properties of their respective owners. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 3: Table Of Contents

    Warranty and after-service . . . 77 Specifications . . . . . . . . . . . . . 77 LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 4: Introduction

    ►Remove all the attachments including the power cord and cables, from the projector when carrying the projector. Dented parts LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 5: Checking The Contents Of Package

    NOTICE ►Do not touch the lens surface directly. ► Keep the dust protector of the projector, and use it while no lens unit is attached to the projector. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 6: Part Names

    Clean the air filter periodically. NOTICE ►Do not touch the lens surface directly. ► Keep the dust protector of the projector, and use it when no lens unit is attached to the projector. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 7: Control Panel

    (15) Component (Y, Cb/Pb, Cr/Pr) ports CAUTION ►Use the shutdown switch only when the projector is not turned off following the normal procedure, since pushing this switch stops operation of the projector without cooling it down. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 8: Remote Control

    LASER button, since the beam is not good for eyes. CAUTION ►Note that the laser beam may result in hazardous radiation exposure. Use the laser pointer only for pointing on the screen. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 9: Setting Up

    ►Consult with your dealer about installation beforehand. ►Use only the mounting accessories the manufacturer specifi ed, and leave installing and removing the projector with the mounting accessories to the service personnel. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 10: Projection Distance

    Setting up Projection distance See the user’s manual of your lens unit for your case. NOTICE ►Do not use a polarized screen, since it can cause a red image. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 11: Placement

    Security slot CAUTION ►Do not place the anti-theft chain or wire near the projector’s exhaust vents, since the chain or wire heated by the hot exhaust gas may cause burns. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 12: Connecting With Your Devices

    ►Be careful not to damage the cables. Route the cables not to be stepped on and pinched out. NOTICE ►Do not turn your device on prior to the projector, except for the cases directed by the manuals of devices. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 13: For Safety

    R/Cr/Pr B/Cb/Pb VIDEO 2 do not connect the LAN port R/Cr/Pr B/Cb/Pb VIDEO 2 to any network that might Cb/Pb have excessive voltage. Cb/Pb Cr/Pr Cr/Pr (continued on next page) HDMI LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 14 VIDEO 2 Cb/Pb Cr/Pr Redirection Control of of an RGB input another device by to another display RS-232C commands RS-232C RGB IN Simultaneous remote control of another projector REMOTE CONTROL IN LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 15 • Be sure to use an HDMI cable that has the HDMI logo. • When the projector is connected with a device having DVI connector, use a DVI to HDMI cable to connect with the HDMI input. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 16: Connecting Power Supply

    ►Connect firmly the power cord not to result in loose connection. Do not use a loose or unsound power outlet. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 17: Remote Control

    When a battery leaked in the battery holder, replace the batteries after wiping the leakage out. • Obey the local laws on disposing a battery. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 18: Transmitting Condition

    To set the mode of the remote control, slide the knob of the frequency switch inside the battery cover into the position indicated by the mode number to choose. Back of the remote control LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 19: Using The Remote Id Function

    Do not apply the laser beam to anything except the screen. • Never hit eyes by the laser beam since the laser beam can injure eyes. • Do not apply the laser beam to anything except the screen. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 20: Operating

    ►Do not approach the lamp cover and the exhaust vents, while the projection lamp is on. NOTICE ►Do not turn your device on prior to the projector, except for the cases directed by the manuals of devices. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 21: Turning Off

    CAUTION ►Do not place the projector with an inclination of 5 degrees or more. The projector leaned exceeding the limit could cause malfunction and shorten the life of the projector. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 22: Using The Functions For The Lens

    CLEAR LENS MEMORY dialog. Select the number to be cleared using ▲/▼ buttons and press the ► button. The dialog to check your intention will come out. Then press the ► button again in the dialog. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 23: Displaying And Switching The Image

    ● This function also can use for document camera. Select the input port that ID 1 ID 3 DIGITAL connected the document camera. ID 2 ID 4 KEYSTONE FOCUS ZOOM BLANK LASER LENS SHIFT ENTER LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013) FREEZE MENU...

  • Page 24: Selecting An Aspect Ratio

     NATIVE  FULL LASER INDICATOR  For no signal STANDBY/ON MY SOURCE COMPUTER ENTER 4:3 (fixed, except LW650/LW720) / FULL (fixed, LW650/ VIDEO LW720) ID 1 ID 3 DIGITAL ● 16:10 / FULL: LW650/LW720 only. NATIVE: Except LX750. FREEZE...

  • Page 25: Adjusting The Position

    USL-801 only (51)), this function may not work well. ● When the horizontal lens shift is not set to the center, this function may not work well. ● This function will be unavailable when Transition Detector is on (64). LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 26: Using The Magnify Feature

    ● If the projector continues projecting a still image for a long time, the LCD MY BUTTON MAGNIFY panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. KEYSTONE FOCUS ZOOM LENS SHIFT LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 27: Temporarily Blanking The Screen

    However, when turning the projector on, the lens shutter closed or incompletely BLANK LASER opened opens automatically. ENTER FREEZE MENU SHUTTER RESET ASPECT PbyP AUTO POSITION MY BUTTON MAGNIFY KEYSTONE FOCUS ZOOM LENS SHIFT LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 28: Pbyp (Picture By Picture)

    (49). The position of the both area is exchanged without any setting change. NOTE •For some signals, it may not be displayed correctly in the PbyP mode, even if it can be displayed properly in the normal mode. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 29: Using The Menu Function

    Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE etc.) cannot be reset. ● Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 30: Easy Menu

    PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and COLOR TEMP (31, 32) items in PICTURE menu. • When this function is performed, lines or other distiortions may appear. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 31: Advanced Menu

    Press the ► or ENTER button to use the menu of PICTURE, ADVANCED MENU IMAGE, INPUT, SETUP, SCREEN, OPTION, NETWORK or SECURITY. EXIT Press the ◄ or ENTER button to finish the OSD menu. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 32: Picture Menu

    “1”. The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar. • When this function is performed, lines or other distortions may appear. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 33 Weak ó Strong SHARPNESS • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 34 This is not malfunction. • The LOAD functions can be also performed by the MY MEMORY button which can be set by the MY BUTTON item in OPTION menu (49). LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 35: Image Menu

    4:3 ó 16:9 ó 16:10* ó 14:9 ó SMALL* ó NATIVE* ó FULL* For no signal 4:3 (fixed, except LW650/LW720) / FULL (fixed, LW650/LW720) • *16:10 / FULL: LW650/LW720 only. NATIVE: Except LX750. SMALL: Except LW650/LW720. • The NORMAL mode keeps the original aspect ratio of the signal.
  • Page 36 • The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (50). LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 37: Input Menu

    • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 38 Selecting the optimum mode automatically. VIDEO Suitable for DVD signals COMPUTER Suitable for computer signals • If the COMPUTER is selected, COLOR, TINT, OVERSCAN can not be selected. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 39 • When ON is selected, moving pictures are displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select OFF. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 40 ◄ button. The screen will then return to the RESOLUTION menu displaying the previous resolution. • For some pictures, this function may not work well. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 41: Setup Menu

    • When the horizontal lens shift is not set to the center, this function may not work well. • This function will be unavailable when the Transition Detector is on (64). (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 42 OUT port in the standby mode. MONITOR OUT (2) Select one of the COPUTER IN or BNC ports using ◄/► buttons. COMPUTER IN1 ó COMPUTER IN2 OFF ó BNC • OFF disables the MONITOR OUT port. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 43: Screen Menu

    Plain screens in each color. BLACK • To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 44 • When the ON is selected to the MyScreen PASSWORD item in the SECURITY menu (62), the START UP is fixed to MyScreen. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 45: Yscreen Lock

    MyScreen Lock function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu (62). (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 46 OK on screen and press the ENTER or VIDEO button. To revert to the previous name without saving changes, move the cursor to the CANCEL on screen and press the ENTER or VIDEO button. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 47 1: Channel 1, primary channel / language 2: Channel 2 3: Channel 3 4: Channel 4 The channel data may vary, depending on the content. Some channel might be used for secondary language or empty. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 48: Option Menu

    • When the projector is suspended from the ceiling this feature will not function properly so select the OFF. • This function will be unavailable when the Transition Detector is on (22). (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 49 • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. • For the air filter cleaning, see the section "Filter unit" (69). (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 50 This item is to assign an input signals to MY SOURCE button on the remote control (22). Using the ▲/▼ buttons sets one of the input signal. MY SOURCE (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 51 • Please be careful with the operating environment of the projector and the condition of the filter unit. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 52 1 or only 2 as described in Remote Control Settings (17). Neither can be turned off at the same time. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 53 (Network Guide - 3.7 Controlling the external equipment via the projector (using the NETWORK BRIDGE function)) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 54 NOTE • HALF-DUPLEX is selected as the default setting. • When you select HALF-DUPLEX, check the items, RESPONSE LIMIT TIME and BYTES INTERVAL TIMEOUT. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 55 NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL OUT port. 50ms ó 100ms ó 150ms ó 200ms NOTE • 50ms is selected as the default setting. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 56 Note that the items LAMP TIME, FILTER TIME, LANGUAGE, SECURITY and NETWORK settings are not reset. CANCEL ð OK LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 57: Network Menu

    Protocol) • Auto IP function will be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is “ON”. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 58 • The projector will override this setting and retrieve TIME DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings of the User’s Manual - Network Guide) (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 59 ►, ENTER or VIDEO button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press the ◄, ENTER or VIDEO button. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 60 MY IMAGE DELETE menu. (2) Press the ► button to perform to erase. To stop erasing, press the ◄ button. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 61 Network will be once cut off when choose restart. If DHCP is selected on, IP address may be changed. After selecting RESTART EXECUTE, NETWORK menu may not be controlled approx. 30 seconds. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 62: Security Menu

    • Pressing the ENTER button on the remote control or ► button on the projector will close the NOTE NEW PASSWORD box. • Please do not forget your password. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 63 3-3 Contact your dealer with the 10 digit Inquiring ENTER PASSWORD box Code. Your password will be sent after your user (large) registration information is confirmed. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 64 3-2 Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user registration information is confirmed. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 65 3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your ENTER PASSWORD box (large) user registration information is confirmed. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 66 3-3 Contact your dealer with the 10 digit inquiring code. Your password will be sent after your user registration information is confirmed. (continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 67 CANCEL on screen and press the ENTER or VIDEO button. • The MY TEXT WRITING function is available only when the MY TEXT PASSWORD function is set to OFF. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 68: Maintenance

    LAMP TIME was reset. Refer to the value for proper maintenance. NOTICE ►Be sure to reset the LAMP TIME only when you have replaced the lamp unit. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 69: Lamp Warning

    When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 70: Filter Unit

    ►To keep inside ventilation normal, check and replace the filter unit periodically. ►Use only the manufacturer specified type of the filter unit. NOTICE ►Be sure to reset the FILTER TIME only when you have replaced the filter unit. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 71: Internal Clock Battery

    ►Do not wet the product. Do not let any liquids enter to the inside. Do not use a spray. NOTICE ►Do not directly touch the lens surface with hands. ►Do not use cleaners or chemicals other than those specified in this manual. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 72: Troubleshooting

    - Pressing the one of buttons to call a signal input might be ignored, when all the input ports belonging to the category the button's name shows are set to the "SKIP" by the item SOURCE SKIP of the OPTION menu. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 73: Regarding The Indicator Lamps

    After performing Lighting any needed maintenance, turn the power on again. If the same indication is displayed after the remedy, please contact your dealer or service company. (Continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 74 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 75: Phenomena That May Be Easily Mistaken For Machine Defects

    45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. (Continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 76 Turn off the both equipment, and turn on them again The signal format on the HDMI is not supported. Check the video setting on your HDMI equipment. (Continued on next page) LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 77 • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect. LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)

  • Page 78: Warranty And After-Service

    Item Specifications Product name Liquid crystal projector LX750: 1024 horizontal x 768 vertical Liquid Crystal Panel LW650/LW720: 1366 horizontal x 800 vertical LS+700: 1400 horizontal x 1050 vertical Lens * See the manual of the optional lens. Lamp 350W UHB Power supply AC 110-120V/6.0A, AC220-240V/3.1A...
  • Page 79 Specifications Specifications (continued) [unit: mm] LIT MAN USR LW650/LS+700/LX750/LW720 OPRT GUID 020-000159-02 Rev.1 (06-2013)
  • Page 80 Corporate offi ces USA – Cypress ph: 714-236-8610 Canada – Kitchener ph: 519-744-8005 Worldwide offi ces United Kingdom Eastern Europe Singapore Japan ph: +44 118 977 8000 ph: +36 (0) 1 47 48 100 ph: +65 6877-8737 ph: 81-3-3599-7481 France Middle East Beijing South Korea...

This manual is also suitable for:

Lw650Ls+700Lx750

Table of Contents