Resetting All Settings - Christie DS Series User Manual

Regarding the indicator lamps (continued)
NOTE
• When the interior portion has become overheated, for safety
purposes, the projector is automatically shut down, and the indicator lamps may
also be turned off. In such a case, disconnect the power cord, and wait at least
20 minutes. After the projector has sufficiently cooled down, turn the power on
again.

Resetting all settings

When it is difficult to correct wrong settings, the FACTORY RESET function of
SERVICE item in OPTION menu (104) can reset all settings (except settings
such as LANGUAGE, AUTO BLANK, LIGHT SOURCE HOURS, FILTER HOURS,
FILTER MESSAGE, STANDBY MODE, COMMUNICATION, SCHEDULE,
CONTROL TERMINAL, REMOTE CONTROL OUT, SECURITY and NETWORK)
to the factory default.
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Operating Guide
Regarding the indicator lamps
126
020-001587-01 Rev. 1 (12-2018)
LIT MAN USR DS Series