Reach A State To Install A Fresh Os (Oracle Ilom Cli) - Oracle SPARC T5-4 Installation Manual

2. When prompted, follow the onscreen instructions for configuring the Oracle
Solaris OS on your host.
You will be prompted to confirm the configuration several times, enabling confirmation and
changes. If you are not sure how to respond to a particular value, you can accept the default,
and make future changes when the Oracle Solaris OS is running. See
Configuration Parameters" on page 77
you must provide during initial configuration.
Log in to the server.
3.
You can now enter Oracle Solaris OS commands at the prompt. For more details, refer to the
Oracle Solaris 11 or 10 OS man pages and documentation at:
http://www.oracle.com/goto/Solaris11/docs
http://www.oracle.com/goto/Solaris10/docs
Related Information
"Prepare the Power Cords" on page 67
■
"Connect a Terminal or Emulator to the SER MGT Port" on page 68
■
"Power on the System for the First Time" on page 70
■
"Oracle Solaris OS Configuration Parameters" on page 77
■
Reach a State to Install a Fresh OS (Oracle ILOM
CLI)
If you do not plan to use the preinstalled OS use this procedure to prevent the server from
booting from the preinstalled OS. You can perform this alternative procedure after reading Step
5 in "Configure the Preinstalled OS" on page
Prepare the appropriate boot media according to your installation method.
1.
There are many methods by which you can install the OS. For example, you can boot and install
the OS from DVD media or from another server on the network.
For more information about the methods, refer to these Oracle Solaris document sections:
Installing Oracle Solaris 11 Systems, comparing installation options at:
■
http://www.oracle.com/goto/Solaris11/docs
Oracle Solaris 10 Installation Guide: Planning for Installation and Upgrade, choosing an
■
Oracle Solaris installation method at:
http://www.oracle.com/goto/Solaris10/docs
2.
From Oracle ILOM, set the OpenBoot auto-boot? parameter to false.

Reach a State to Install a Fresh OS (Oracle ILOM CLI)

for a description of the Oracle Solaris OS parameters
72.
Powering On the Server for the First Time
"Oracle Solaris OS
73