Table of Contents
Advertisement
The CMA installation might block some of the power outlets in the rack, making them
Note -
unavailable.
1.
Install the L brackets at the rear.
The brackets are marked "Left" and "Right" as viewed from the back of the server.
Repeat for left and right sides:
a.
Identify the left and right side brackets.
Remove the two middle screws from the rackmount adapter.
b.
c.
Place the bracket over the center two mounting holes.
d.
Secure each mounting bracket with two No. 2 Phillips screws.
2.
Slide the left and right swivel clips into the left and right L brackets.
3.
Secure the CMA with the two captive screws.
Install the CMA (Multi-piece CMA)
Installing the Server
47
Advertisement
Table of Contents
