Ser Mgt Ports - Oracle SPARC T5-4 Installation Manual

Identifying Ports
Pin
A1
A2
A3
A4
Related Information
"Server Overview" on page 12
■
"Front Panel Components" on page 13
■
"Rear Panel Components" on page 14
■
"Cabling Requirements" on page 55
■
"Connecting Data and Management Cables" on page 61
■

SER MGT Ports

The SER MGT RJ-45 port, located on the rear panel, provides an TIA/EIA-232 serial Oracle/
Cisco standard connection to the SP. This port is the default connection to the Oracle ILOM
system controller. For DTE to DTE communications, you can use the supplied RJ-45 to
DB-9 crossover adapter with a standard RJ-45 cable to achieve the required null modem
configuration. See
An additional SER MGT port is located on the main module and is accessible from the front
panel. See
Pin
1
2
3
58 SPARC T5-4 Server Installation Guide • July 2015
Signal Description
+5 V (fused)
USB0/1-
USB0/1+
Ground
"Rear Panel Components" on page
"Front Panel Components" on page
Signal Description
Request to Send
Data Terminal Ready
Transmit Data
Pin Signal Description
B1 +5 V (fused)
B2 USB2/3-
B3 USB2/3+
B4 Ground
14.
13.
Pin Signal Description
5 Ground
6 Receive Data
7 Data Set Ready