Install the Server
Ensure that the bottom edge of the server has cleared the bottom of the rack rails.
5.
Secure the server to the front panel using four No. 2 Phillips screws.
6.
Replace all of the components that you removed.
For instructions on how to install these components, refer to the service manual.
Related Information
"Rack Compatibility " on page 30
■
"Rack Cautions" on page 31
■
"Stabilize the Rack" on page 32
■
"Rackmount Kit (Part number 7069640)" on page 32
■
"Rackmount Kit (Part number 350-1662-02)" on page 34
■
54
SPARC T5-4 Server Installation Guide • July 2015