19" Systems Mounting- Telescopic Rail-Kit For Sn2700; Table 8: Installation Kit - Mellanox Technologies SN2700 Hardware User Manual

Installation
2.4.2

19" Systems Mounting- Telescopic Rail-Kit for SN2700

There are two installation kit options:
• Standard depth systems should be mounted using the standard rail kit.
• Short depth systems can be mounted using either of the rail kits.
The following parts are included in the rail kit package (see
Table 8 - Installation Kit
Kit OPN
MTEF-KIT-B
MTEF-KIT-S
• 1x Right inner rail (A)
• 1x Left inner rail (B)
• 2x Outer rails (C)
• 2x Outer rails (D)
• 10x M6 Standard cage nuts¹ ² and 10x M6 Standard pan-head Phillips screws¹ (E)
• 2x Phillips100 DEG F.H TYPE-I ST.ST 6-32 X 1/4 screw with around patch (F)
¹ Other threads are available by special order: M5, 10-32, 12-24
² G-type cage-nut is available by special order.
Note: the Telescopic Rail-Kit is not included in the system's package, and can be pur-
chased separately.
The rails must be separated prior to the installation procedure. See
Figure
Rack Size and Rack Depth Range
Short (17"-24" \ 43.1 to 61 cm)
Standard (24"-34" \ 61 to 86.3 cm)
13):
Figure 14.
Mellanox Technologies
Rev 1.2
23