Front A-Arms; Www.mymowerparts.com - Arctic Cat DVX 400 2008 Service Manual

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
NOTE: The stamped mark of the dust seals must
be directed toward the outside of the assemblies.
5. Install the swing arm and pivot shaft; then install
the swing-arm pivot nut and tighten to specifica-
tions.
6. Install the rear shock absorber and front arm; then
tighten the shock absorber mounting nuts (1 and 2)
to specifications.
7. Install the rear arm bolts and nuts; then tighten the
nuts (3 and 4) to specifications.

www.mymowerparts.com

Back
SP361
SP362
SP363A
Back to TOC
8. Install the rear arm guard and the swing-arm
guard.

Front A-Arms

REMOVING
1. Secure the ATV on a support stand to elevate the
front wheels; then remove a front wheel.
! WARNING
Make sure the ATV is solidly supported on the sup-
port stand to avoid injury.
2. Remove the cotter pin from the nut.
3. Remove the nut securing the hub. Account for a
washer.
4. Remove the Allen-head screws (1) securing the
brake caliper; then remove the caliper and lay
aside.
Back to Section TOC
SP365
7
SP366
Next
7-11