FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
3. Place the two halves of the throttle control onto the
handlebars and secure with the two machine
screws.
www.mymowerparts.com
Back
9-6
AF680D
AL610D
Back to TOC
ADJUSTING
To adjust the throttle cable, see Section 2.
Reverse Selector/Lock
REMOVING
1. Remove the reverse selector knob mounting
screw; then remove the cap screw securing the
lower cable housing to the reverse cable bracket.
2. Disconnect the cable end from the reverse lock
lever; then remove the cable assembly.
INSTALLING
1. Engage the lower cable end in the reverse lock
lever; then attach the cable housing to the reverse
cable bracket and tighten the cap screw securely.
2. Route the cable along the upper right frame tube;
then attach the reverse selector knob to the frame
with the mounting screw and tighten securely.
3. Replace any cable ties that were removed.
Back to Section TOC