Front A-Arms - Arctic Cat Y-12+ 2012 Service Manual

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
3. Remove the ATV from the support stand.

Front A-Arms

REMOVING
1. Secure the ATV on a support stand to elevate the
front wheels; then remove the wheels.
! WARNING
Make sure the ATV is solidly supported on the support
stand to avoid injury.
2. Remove the cotter pin from the nut. Discard the cot-
ter pin.
3. Remove the nut securing the hub.
4. Remove the brake caliper. Account for two cap
screws.
 NOTE: Do not allow the brake caliper to hang from
the cable/hose.
5. Remove the hub assembly.
6. Remove the cotter pin and slotted nut securing the tie
rod end to the knuckle; then remove the tie rod end
from the knuckle.
www.mymowerparts.com
CD008
PR377B
Manual
Table of Contents
7. Remove the cap screws securing the ball joints to the
knuckle.
CAUTION
Support the knuckle when removing the cap screws or
damage to the threads will occur.
8. Tap the ball joints out of the knuckle; then remove
the knuckle.
9. Remove the lower shock absorber eyelet from the
upper A-arm.
10. Remove the cap screws securing the A-arms to the
frame.
11. Remove the circlip from the ball joint; then remove
the ball joint from the A-arm.
Section
Table of Contents
AF618D
PR203
7
AF610D
7-3