Front A-Arms - Arctic Cat DVX 400 2004 Service Manual

NOTE: The stamped mark of the dust seals must
be directed towad the outside of the assemblies.
5. Install the swing arm and pivot shaft; then install the
swing-arm pivot nut and tighten to specifications.
6. Install the rear shock absorber and front arm; then
tighten the shock absorber mounting nuts (1 and 2) to
specifications.
7. Install the rear arm bolts and nuts; then tighten the
nuts (3 and 4) to specifications.
10
SP361
8. Install the rear arm guard and the swing-arm guard.

Front A-Arms

REMOVING
1. Secure the ATV on a support stand to elevate the
front wheels; then remove a front wheel.
Make sure the ATV is solidly supported on the sup-
port stand to avoid injury.
2. Remove the cotter pin from the nut.
SP362
3. Remove the nut securing the hub. Account for a
washer.
4. Remove the Allen-head screws (1) securing the
brake caliper; then remove the caliper and lay aside.
SP363A
! WARNING
SP365
SP366