Arctic Cat DVX 400 2008 Service Manual page 130

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
NOTE: Always remove the negative battery cable
first; then the positive. Install the positive cable
cable first; then the negative.
2. Remove the two forward underseat screws; then
remove the rear fender support mounting nuts.
3. Remove the front fender support brackets from the
frame leaving them attached to the body.
4. Remove the two nuts from the plastic studs on the
upper forward support bracket.
www.mymowerparts.com
Back
8-8
SP107
SP098
SP099
Back to TOC
5. Remove the screw securing the front lip of the
body to the headlight housing.
6. Pull rearward on the gas tank cover and dislodge
the two barbed fasteners; then remove the gas tank
cap.
7. Lift up the rear of the gas tank cover and push for-
ward to disengage the "L" tabs; then lift the gas
tank cover off. Install the gas tank cap.
Back to Section TOC
SP100
SP102
SP101
Next