Front A-Arms - Arctic Cat 650 Twin2004 Service Manual

Front A-Arms

REMOVING
1. Secure the ATV on a support stand to elevate the
wheel; then remove the wheel.
! WARNING
Make sure the ATV is solidly supported on the sup-
port stand to avoid injury.
2. Remove the wheel cap from the hub; then remove
the cotter pin from the nut.
3. Remove the nut securing the hub. Account for a
washer.
4. Remove the brake caliper.
5. Remove the hub assembly.
6. Remove the cotter pin and slotted nut securing the
tie rod end to the knuckle; then remove the tie rod
end from the knuckle.
7-4
7. Remove the cap screws securing the ball joints to
the knuckle.
KX041
8. Tap the ball joints out of the knuckle; then remove
the knuckle.
9. Remove the lower shock absorber eyelet from the
upper A-arm.
CD007
10. Remove the cap screws securing the A-arms to the
frame.
AF618D
AF628D
AF626D