Rear Shock Absorber - Arctic Cat DVX 400 2008 Service Manual

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
Rebound
1. Turn the lower damping force adjuster screw (1)
fully clockwise.
2. Turn the adjuster 1 1/2 turns counterclockwise for
the "standard" setting.
Compression
1. Turn the upper damping force adjuster screw (2)
fully clockwise.
2. Turn the adjuster 1 3/4 turns counterclockwise for
the "standard" setting.
! WARNING
Always adjust the front shock absorbers equally for
spring preload and damping force (rebound/com-
pression). Unequal adjustments could adversely
affect handling causing loss of control.

Rear Shock Absorber

NOTE: Critical torque specifications are located
in Section 10.
REMOVING
1. Secure the ATV on a support stand to elevate the
wheels and to release load on the suspension.
www.mymowerparts.com
Back
7-4
CD834A
CD833A
Back to TOC
! WARNING
Make sure the ATV is solidly supported on the sup-
port stand to avoid injury.
2. Remove the rear arm guard (1); then remove the
swing-arm guard (2).
3. Remove the rear arm lower nut and cap screw (3);
then remove the shock absorber nuts and cap
screws (4-5).
Back to Section TOC
SP325
SP326
SP327
Next