Arctic Cat DVX 400 2008 Service Manual page 34

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
7. Remove the engine oil outlet pipe (3) and the inlet
pipe (4); then remove the spacer and O-ring from
behind the outlet pipe.
8. Remove the gas tank (see Section 4).
9. Remove the spark plug cap (1), oil tank overflow
hose (2), and the breather hose (3).
10. Remove the engine coolant inlet hose (4); then dis-
connect the coolant outlet hose (5).
www.mymowerparts.com
Back
3-4
SP138
SP139
SP140
Back to TOC
11. Disconnect the breather hose (6); then remove the
oil return tank (7) and the drain-back hose (8).
12. Remove the carburetor leaving the throttle cable
and the choke cable attached; then secure the car-
buretor out of the way sufficiently to enable
engine removal.
13. Disconnect the two starter leads from the starter
and secure them out of the way.
14. Remove the engine sprocket cover; then remove
the engine sprocket with the drive chain.
15. Remove the clutch cable bracket (1); then discon-
nect the clutch cable (2) from the actuator lever.
Back to Section TOC
SP141
SP142
SP143
Next