Arctic Cat DVX 400 2008 Service Manual page 59

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
2. Install the 4th driven gear onto the driveshaft.
3. Install the 3rd driven circlip, washer, and bushing
onto the driveshaft. Make sure the oil hole in the
bushing aligns with the hole in the shaft.
www.mymowerparts.com
Back
CC206D
CC207D
CC208D
CC209D
Back to TOC
! CAUTION
It is very important to assure the oil feed hole in the
bushing and oil supply hole in the driveshaft align. If
not aligned, engine damage will result.
4. Install the 3rd driven gear onto the driveshaft.
5. Install the 5th driven gear onto the driveshaft.
6. In order, install the reverse driven bushing, reverse
driven gear, washer, and circlip onto the drive-
shaft. Make sure the oil hole in the reverse driven
bushing aligns with the hole in the driveshaft.
! CAUTION
It is very important to assure the oil feed hole in the
bushing and oil supply hole in the driveshaft align. If
not aligned, engine damage will result.
Back to Section TOC
SP221
3
CD366
SP222
Next
3-29