Examining The Installation Site; Weight Support; Temperature And Humidity - HP FlexNetwork HSR6800 Installation Manual

Insert the ESD plug into the ESD socket.
3.
Make sure the rack is reliably grounded.
4.
Figure 1 Attaching an ESD wrist strap
(1) ESD wrist strap
(3) ESD plug

Examining the installation site

The routers can only be used indoors. To make sure the router operates correctly and to prolong its
service lifetime, the installation site must meet the following requirements.

Weight support

Make sure the floor can support the total weight of the router and accessories (such as the rack and
HIMs/MIMs). For the weight of the router and accessories, see
technical specifications."

Temperature and humidity

Maintain temperature and humidity levels in the equipment room in an acceptable range.
•
Lasting high relative humidity can cause poor insulation, electricity leakage, mechanical
property change of materials, and metal corrosion.
•
Lasting low relative humidity can cause washer contraction and ESD and introduce problems
such as loose screws and circuit failure.
•
High temperature can accelerate the aging of insulation materials and significantly lower the
reliability and lifespan of the switch.
For the temperature and humidity requirements of the router, see
(2) Lock
3
"Appendix A Chassis views and
Table 1 and Table 2.