Sap-4Exp - HP FlexNetwork HSR6800 Installation Manual

Item
Hot swapping
SAP-48GBP fixed Ethernet port specifications
The fixed Ethernet ports of the SAP-48GBP have the same specifications as the fiber ports of the
FIP-110 combo interfaces. For more information, see
Transceiver modules for the SAP-48GBP and the SAP-24GBP fiber ports are the same. For more
information, see

SAP-4EXP

SAP-4EXP front panel
Figure 82 SAP-4EXP front panel
(1) SFP+ ports 0 to 3
(3) LEDs for SFP+ ports 0 to 3
(5) Captive screw
SAP-4EXP specifications
Item
Memory type and size
NVRAM
Fixed Ethernet ports (SFP+)
Hot swapping
SAP-4EXP fixed Ethernet port specifications
Table 52 10G Ethernet port specifications
Item
Protocol standard
Connector type
Transceiver module
Physical layer type
supported
Interface rate
Remarks
Supported
Table 51.
Remarks
•
Default—Two 2-GB DDR3 SDRAMs
•
Maximum—Two 2-GB DDR3 SDRAMs
128 KB
4
10G Ethernet ports
Supported
Supported standard
802.3ae
LC
SFP+
10GBASE-R/W
•
In LAN PHY mode: 10.3125 Gbps
•
In WAN PHY mode: 9.95328 Gbps
Table 43.
(2) SAP module status LED (RUN)
(4) Ejector lever
108