Sap-24Gbp - HP FlexNetwork HSR6800 Installation Manual

SAP-24GBP

CAUTION:
Use transceiver modules provided by Hewlett Packard Enterprise only. The router might be
incompatible with transceiver modules from other vendors. The system generates an alarm when a
transceiver module from another vendor is installed.
SAP-24GBP front panel
Figure 80 SAP-24GBP front panel
(1) SFP ports 0 to 23
(3) LEDs for SFP ports 0 to 23
(5) Captive screw
SAP-24GBP specifications
Item
Memory type and size
NVRAM
Fixed Ethernet ports
(SFP)
Dimensions (H × W × D)
Hot swapping
SAP-24GBP fixed Ethernet port specifications
The fixed Ethernet ports of the SAP-24GBP have the same specifications as the fiber ports of the
FIP-110 combo interfaces. For more information, see
Remarks
•
Default—Two 1-GB DDR2 SDRAMs
•
Maximum—Two 2-GB DDR2 SDRAMs
128 KB
24 fiber Ethernet ports
Supporting 100/1000 Mbps autosensing
Supporting the following types of transceiver modules:
•
100 Mbps SFP fiber transceiver modules
•
1000 Mbps SFP fiber transceiver modules
•
100/1000 Mbps SFP fiber transceiver modules
•
10/100/1000 Mbps SFP copper transceiver modules supporting
fiber-to-copper conversion.
All ports support Layer 3 routing and high-performance Layer 2 switching
functions.
45 × 399 × 412 mm (1.77 × 15.71 × 16.22 in)
Supported
105
(2) SAP module status LED (RUN)
(4) Ejector lever
Table 43.