Product
code
JD103A
NOTE:
The BIDI modules must be used in pairs. For example, if you install JD098B in the local port, you
must install JD099B in the peer port.
SAP-48GBP
CAUTION:
Use transceiver modules for the fiber ports provided by Hewlett Packard Enterprise only. The router
might be incompatible with transceiver modules from other vendors. The system generates an alarm
when a transceiver module from another vendor is installed.
SAP-48GBP front panel
Figure 81 SAP-48GBP front panel
(1) SFP ports 0 to 47
(3) LEDs for SFP ports 0 to 47
(5) Captive screw
SAP-48GBP specifications
Item
Memory type and size
NVRAM
Fixed Ethernet ports (SFP)
Central
Description
wavelength
SFP LC LH40
1550nm
Transceiver
HPE X120 1G
SFP LC LH100
1550 nm
Transceiver
Remarks
•
•
128 KB
48 fiber Ethernet ports
Supporting 100/1000 Mbps autosensing
Supporting the following types of transceiver modules:
•
•
•
•
Connector
LC
(2) SAP module status LED (RUN)
(4) Ejector lever
Default—Two 1-GB DDR2 SDRAMs
Maximum—Two 2-GB DDR2 SDRAMs
100 Mbps SFP fiber transceiver modules
1000 Mbps SFP fiber transceiver modules
100/1000 Mbps SFP fiber transceiver modules
10/100/1000 Mbps SFP copper transceiver modules supporting
fiber-to-copper conversion.
107
Optical fiber
optical fiber
9/125 µm single-mode
optical fiber
Max.
transmission
distance
(24.86 miles)
100 km
(62.14 miles)