Prepare The Installation Site - HP 2530 SERIES Installation And Getting Started Manual

1. Prepare the Installation Site

Cabling Infrastructure - Ensure the cabling infrastructure meets the
■
necessary network specifications. See appendix A,
Technology Information Specifications"
Installation Location - Before installing the switch, plan its location and
■
orientation relative to other devices and equipment:
• In the front of the switch, leave at least 7.6 cm (3 inches) of space for
the twisted-pair and fiber-optic cabling.
• In the back of the switch, leave at least 3.8 cm (1 1/2 inches) of space
for the power cord.
• On the sides of the switch, leave at least 7.6 cm (3 inches) for cooling.
Installing the Switch
Installation Procedures
"Cabling and
for more information:
2-5