HP FlexNetwork HSR6800 Installation Manual page 63

•
Power cycle the router. This method might cause data loss, and is the least-preferred method.
The first and second methods are called warm reboot or warm startup, and can be used remotely.
The third method is called cold reboot or cold startup.
For data security, if you reboot the router while the router is performing file operations, the router
does not reboot.
The precision of the rebooting timer is 1 minute. One minute before the rebooting time, the router
prompts "REBOOT IN ONE MINUTE" and reboots in one minute.
If the main startup configuration file does not exist, do not use the reboot command to reboot the
router or the active MPU. In this case, you should specify the main startup configuration file first, and
then reboot the active MPU.
To reboot the router immediately at the CLI:
Task
Reboot the router or the card in
the specified slot immediately.
To schedule a reboot:
Task
Specify a reboot time and date.
Specify a reboot waiting time.
Command
reboot [ slot slot-number ]
Command
schedule reboot at hh:mm
[ date ]
schedule reboot delay { hh:mm |
mm }
57
Remarks
Available in user view.
If you do not specify the slot
keyword, the command reboots
the router, including the active
MPU, standby MPU, and the
LPUs.
Remarks
Available in user view.
By default, the reboot date and
time is not specified.
Available in user view.
By default, the reboot delay time is
not specified.