Displaying The Mpu Memory Usage; Displaying The Cf Card Information - HP FlexNetwork HSR6800 Installation Manual

Table 15 Command output
Field
Slot 0 CPU usage
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes

Displaying the MPU memory usage

Use the display memory command to display the active MPU memory information.
<Sysname> display memory
The statistics about memory is measured in KB:
Chassis 1 Slot 1:
Mem:
-/+ Buffers/Cache:
Swap:
Table 16 Command output
Field
System Total Memory(bytes)
Total Used Memory(bytes)
Used Rate

Displaying the CF card information

Use the display device cf-card command to display the CF card information.
<Sysname> display device cf-card
Slot No.
-----------------------------------------------
0
0
Description
CPU usage of the card in slot 0.
If the card in the slot has multiple CPUs:
•
•
After a boot, the system calculates and records the average CPU usage
rate every five seconds.
This field displays the average CPU usage rate in the last five seconds.
After a boot, the system calculates and records the average CPU usage
rate every minute.
This field displays the average CPU usage rate in the last minute.
After a boot, the system calculates and records the average CPU usage
rate every five minutes.
This field displays the average CPU usage rate in the last five minutes.
Total Used
4061060 563844
365776
0 0
Dev No. Status
0 Normal
1 Absent
Slot 0 CPU usage displays the usage of the master CPU of the card
in slot 0.
Slot 0 CPU 1 CPU usage displays the usage of the auxiliary CPU of
the card in slot 0.
Free Shared
3497216 0
3695284
0
Description
Physical memory size (in bytes) of the MPU.
Used memory size (in bytes) of the MPU.
Memory usage of the MPU.
Size(M)
999
N/A
52
Buffers Cached
140 197928
FreeRatio
86.1%