Installing A Cf Card; Installing Optional Components; Installing An Air Filter - HP FlexNetwork HSR6800 Installation Manual

Figure 15 Pushing the MIM into the slot

Installing a CF card

Push the CF card eject button all the way into the slot, and make sure the button does not
1.
project from the panel.
Insert the CF card into the slot, as shown in
2.
the slot.
Figure 16 Inserting the CF card into the slot

Installing optional components

Optional components (including the air filter) are not provided with the router. Purchase them if
necessary.

Installing an air filter

Installing an air filter on an HSR6802/HSR6804
The methods for installing air filters on the HSR6802 and HSR6804 are the same. This section uses
an HSR6804 as an example.
To install an air filter:
Face the left side (side of the inlet vents) of the router.
1.
Install the upper and lower slide rails on the chassis, as shown in
2.
Use a Phillips screwdriver to fasten the fastening screws on the upper and lower slide rails.
3.
Figure 16, and make sure it does not project from
17
Figure 17.