Electricity Safety; Esd Prevention; Examining The Installation Site; Temperature And Humidity - HP MSR954 Series Installation Manual

Hide thumbs Also See for MSR954 Series:
Table of Contents

Advertisement

Electricity safety

Locate the external power switch in the room before installation. Shut off the power immediately
if an accident occurs.
Make sure the router is reliably grounded.
Do not remove and install the chassis cover when the router is operating.
Connect the interface cables correctly.
Use an uninterrupted power supply (UPS).
Do not work alone when the router has power
Always make sure the power has been disconnected during installation or replacement.

ESD prevention

WARNING!
Check the resistance of the ESD wrist strap for safety. The resistance reading should be in the range of
1 to 10 megohm (Mohm) between a human body and the ground.
To prevent electrostatic discharge (ESD), follow these guidelines:
Make sure the router and the floor are reliably grounded.
Keep the equipment room clean to reduce the negative effects of dusts and particles.
Maintain the humidity and temperature levels in the acceptable range.
Always wear an ESD wrist strap. Make sure the wrist strap makes good skin contact and is
reliably grounded.
No ESD wrist strap is provided with the router. Prepare it yourself.
To attach an ESD wrist strap:
1.
Wear the wrist strap on your wrist.
2.
Lock the wrist strap tight around your wrist to maintain good contact with the skin.
Secure the wrist strap lock and the alligator clip lock together.
3.
4.
Attach the alligator clip to the grounding screw on the router.

Examining the installation site

The router can only be used indoors. To ensure correct operation and a long lifespan for your router,
the installation site must meet the requirements in this section.

Temperature and humidity

Maintain the temperature and humidity in the equipment room as described in Error! Reference
source not found..
Lasting high relative humidity can cause poor insulation, electricity creepage, mechanical
property change of materials, and metal corrosion.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents