HP FlexNetwork HSR6800 Installation Manual page 27

Figure 22 Connecting DC power cords
Connecting power cords for the PSR1200-D
CAUTION:
The power cord color code scheme in this section is for illustration only. The cable delivered for your
country or region might use a different color scheme. When you connect a power cord, always
identify the polarity symbol on its wires.
To connect DC power cords:
Loosen the captive screws on the power supply with a Phillips screwdriver to remove the power
1.
supply connector.
Figure 23 Removing the power supply connector.
Plug one end of the wire marked with "–" into the terminal marked with "–", and fasten the screw
2.
to fix the cord.
Plug one end of the wire marked with "+" into the terminal marked with "+", and fasten the screw
3.
to fix the cord.
21