HP FlexNetwork HSR6800 Installation Manual page 28

Figure 24 Attaching the power cords to the power supply connector
Insert the power supply connector in right direction into the power supply, and fasten the captive
4.
screws with a Phillips screwdriver.
Figure 25 Installing the power supply connector to the power supply
Connect the other ends of the wires to the DC power source wiring terminals, with the negative
5.
wire (– or L–) to the negative terminal block (–) and the positive wire (+ or M/N) to the positive
terminal block (+).
Use cable ties to secure the power cords to the rack post.
6.
22