Examining The State Of Password Recovery Capability - HP FlexNetwork HSR6800 Installation Manual

Examining the state of password recovery capability

Reboot the router.
1.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to start memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing.......................Done.
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2010-2015 Hewlett Packard Enterprise Development LP
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
Flash Size
cfa0 Size
NVRAM Size
BASIC CPLD Version
EXTENDED CPLD Version: 2.0
PCB Version
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Press Ctrl + B within three seconds after the "Press Ctrl+B to enter extended boot menu..." .
2.
Press Enter. You can view on the EXTEND-BOOTWARE menu whether password recovery
3.
capability is enabled.
Password recovery capability is enabled.
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Skip Authentication for Console Login
HPE Router BootWare, Version 2.04
: Nov 6 2015
: P2020
: 32KB
: 1000MHz
: DDR3 SDRAM
: 4096MB
: 667MHz
: 8MB
: 999MB
: 128KB
: 2.0
: Ver.B
64
*
*
*
|
|
|
|
|
|
|
|