HP FlexNetwork HSR6800 Installation Manual page 126

LED
(green)
(yellow/green)
FIP-300 LEDs
Figure 91 FIP-300 status LED
Table 66 FIP-300 LED description
LED
(yellow/green)
(yellow/green)
(green)
Status
Hz)
Fast flashing (8
Hz)
Off
Steady green
Status LEDs
for SFP 0 to
Flashing green
SFP 1
Steady yellow
Status
Off
Steady green
Status LEDs
Flashing green
for GE 0 to GE
11
Steady yellow
Flashing yellow
Off
Steady green
Status LEDs
for SFP 0 to
Flashing green
SFP 11
Steady yellow
Off
Slow flashing (1
Hz)
RUN
Fast flashing (8
Hz)
Description
System software is being loaded.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the FIP.
No link is present.
A link is present.
Data is being sent or received at 1000 Mbps.
The transceiver module failed the self-test of the
router.
Description
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
The transceiver module has failed the POST.
No power input is available or the FIP has failed.
The FIP is operating correctly.
System software is being loaded.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the FIP.
120