Sap-20Ge2Xp - HP FlexNetwork HSR6800 Installation Manual

Table 53 Transceiver modules available for the SAP-4EXP 10G Ethernet ports
Product
code
JD092B
JD094B
JG234A
JG915A
NOTE:
• Use transceiver modules for the fiber ports provided by Hewlett Packard Enterprise only. The
router might be incompatible with transceiver modules from other vendors. The system
generates an alarm when a transceiver module from another vendor is installed.
• 1000 Mbps is not supported on the SAP-4EXP SFP+ ports.
• To support the wire-speed forwarding cross board on the SAP-4EXP, the HSR6808 router needs
to be installed with a SFE-X1.

SAP-20GE2XP

SAP-20GE2XP front panel
Figure 83 SAP-20GE2XP front panel
(1) SFP ports (GE0 to GE15)
(3) SFP+ port 0
(5) Operating status LED (RUN)
SAP-20GE2XP specifications
Item
Memory type and size
NVRAM
Central
Description
wavelength
HPE X130
10G SFP+ LC
850 nm
SR
Transceiver
HPE X130
10G SFP+ LC
1310 nm
LR
Transceiver
HPE X130
10G SFP+ LC
1550 nm
LH 40km
Transceiver
HPE X130
10G SFP+ LC
1550 nm
LH 80km
Transceiver
Specification
•
•
128 KB.
Connector
LC
LC
LC
LC
(2) Combo interfaces (GE16 to GE19)
(4) SFP+ port 1
Default—Two 2-GB DDR3 SDRAMs.
Maximum—Four 2-GB DDR3 SDRAMs.
109
Max
Optical fiber transmission
distance
50/125 µm,
300 m (984.25 ft)
multi-mode
9/125 µm, single
10 km (6.21 miles)
mode
9/125 µm, single 40 km (24.86
mode miles)
9/125 µm, single 80 km (49.71
mode miles)