Replacing An Air Filter For An Hsr6808 Router; Replacing A Memory Module - HP FlexNetwork HSR6800 Installation Manual

Figure 52 Pulling the air filter out along the slide rails
Install a new air filter. For the installation procedure, see
4.
HSR6802/HSR6804."

Replacing an air filter for an HSR6808 router

Face the front of the router.
1.
Use a Phillips screwdriver to completely loosen the captive screws of the air filter.
2.
Figure 53 Removing the air filter
Install a new air filter. For the installation procedure, see
3.

Replacing a memory module

CAUTION:
For the router to operate correctly, only use memory modules provided by Hewlett Packard
Enterprise.
The MPUs and LPUs are equipped with memory modules. Before you install or remove a memory
module, remove the MPU or LPU from the chassis first. For more information, see
MPU and a switching fabric
For the memory module specifications, see
module" and "Replacing an
"Appendix A Chassis views and technical
45
"Installing an air filter on an
"Installing an air filter on an
LPU."
HSR6808."
"Replacing an
specifications."