HP FlexNetwork HSR6800 Installation Manual page 131

LED
SFP+ port
1
Status
LEDs for
combo
fiber ports
GE16 to
(yellow/green)
GE19
Status
LEDs for
combo
copper
ports GE16
(yellow/green)
to GE19
Status
LEDs for
SFP ports
GE0 to
(yellow/green)
GE15
Figure 98 SAP-28GE LEDs
Table 73 SAP-28GE LED description
LED
RUN
(green)
Status
LEDs for
Status
Steady yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Status
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
Off
Steady green
125
Description
The transceiver module has failed to be detected.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100 Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100 Mbps.
Description
No power input is available or the SAP-28GE has
failed.
The SAP-28GE is operating correctly.
System software is being loaded or the SAP-28GE
is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-28GE when
system software is being loaded.
No link is present.
A 1000 Mbps link is present.