1. Select the Run Mail button from the Home screen. Select anywhere within envelope on
the Run Mail screen.
2. Select the Envelope size option from the list box on the left of the Edit envelope screen.
3. Select the appropriate size (#10, flat, Post card, or custom)
4. Select OK.
Changing the Envelope or Tape Quantity
Specifying the number of envelopes to print allows you to count down and stop the machine
after a certain number of pieces have been processed. For example, you might want to
remove a certain number from the stacker and place in a separate tray or bag.
To change the number of envelopes or tapes to print, toggle between the Envelope quantity
or Tape quantity tab on the Run Mail screen.
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select the Envelope or Tape quantity tab on the Run Mail screen.
3. Select the envelope or tape Quantity box.
4. Select one of the preset quantities or enter a different number of envelopes or tapes.
Select OK.
5. Select the Start button for envelopes, or Tape button for tapes. The system will stop once
it has processed the number of envelopes/tapes you specified.
Changing the Machine Speed
To change the speed of your machine:
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select Machine speed from the Job Properties list box on the left side of the Run Mail
screen.
3. Select the appropriate setting (Normal, Reduced, Slow, Very Slow)
4. Select OK.
SV62589 Rev. C
Connect+® Series Operator Guide
85