Pitney Bowes Connect+ 500W Operator's Manual page 76

Connect+ series
Hide thumbs Also See for Connect+ 500W:
Table of Contents

Advertisement

Chapter 3
3. You can move the graphic to the left either by tapping the Margin button and entering the
the distance, or by tapping the left position button - a single tap moves the image 0.1 inch
(2.54 mm). Press and hold for more than two seconds and the distance increments 0.5
inch (12.7 mm) every additional second. If you exceed the allowable distance, the green
inter-element link (see 2 in the diagram below) turns from green to red. In the example
here the right margin for the blue element is now at 1.5 inches (38.1mm). Refer to 3 in the
diagram below.
4. The graphics within a group (right-justified or left-justified) are connected to one another
so that moving one also affects the other. In the example below, moving the right justified
green graphic (see 4a) also moves the blue graphic (see 4b) since they are both right jus-
tified (note that this has no affect on the left justified yellow and red graphics).
72
SV62589 Rev. C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect+ 1000Connect+ 2000Connect+ 3000

Table of Contents