Assigning A Vlan Access Port - HP A5830 Configuration Manual

Port type
Access
Trunk
Hybrid

Assigning a VLAN access port

Assign an access port to a VLAN in VLAN view, interface view (including Layer 2 Ethernet interface view,
and Layer 2 aggregate interface view), or port group view.
 Before you assign an access port to a VLAN, create the VLAN.
 In VLAN view, assign only Layer 2 Ethernet interfaces to the VLAN.
Assigning an access port or multiple access ports to a VLAN in VLAN view
Step...
1. Enter system view
2. Enter VLAN view
3. Assign one or a group of
access ports to the VLAN
Assigning an access port in interface view or multiple access ports in port group view to a VLAN
Step...
1. Enter system view
Actions (in the inbound direction)
Untagged frame
Tags the frame with the
PVID tag
Checks whether the PVID
is permitted on the port:

If yes, tags the frame
with the PVID tag

If not, drops the
frame
Command...
system-view
vlan vlan-id
port interface-list
Command...
system-view
Tagged frame

Receives the frame if its
VLAN ID is the same as
the PVID

Drops the frame if its
VLAN ID is different from
the PVID

Receives the frame if its
VLAN is carried on the
port

Drops the frame if its
VLAN is not carried on
the port
Remarks
—
Required
If the specified VLAN does not exist, this
command creates the VLAN first
Required
By default, all ports belong to VLAN 1
Remarks
—
108
Actions (in the outbound
direction)
Removes the VLAN tag and
sends the frame

Removes the tag and send
the frame if the frame
carries the PVID tag and the
port belongs to the PVID

Sends the frame without
removing the tag if its VLAN
is carried on the port but is
different from the PVID
Sends the frame if its VLAN is
carried on the port
The frame is sent with the
VLAN tag removed or intact
depending on your
configuration via the port
hybrid vlan command
This is true of the PVID.