Configuring Cvlan Id Substitution - HP A5830 Configuration Manual

Step...
2. Create a class and enter class
view
3. Configure a match criterion
4. Return to system view
5. Create a traffic behavior and
enter traffic behavior view
6. Configure the action of
marking the 802.1p priorities
in outer VLAN tags
7. Return to system view
8. Create a QoS policy and
enter QoS policy view
9. Associate the traffic class with
the traffic behavior defined
earlier
10. Return to system view
11. Enter Ethernet interface view
or port group view of the
customer network-side port
12. Enable basic QinQ
13. Apply the QoS policy to the
incoming traffic

Configuring CVLAN ID substitution

Basic QinQ does not change the inner VLAN ID when tagging the customer VLAN frame with an outer
VLAN tag. Selective QinQ can change the inner VLAN ID when tagging the customer VLAN frame with
an outer VLAN tag according to the inner VLAN ID substitution function you configured.
Configure inner VLAN ID substitution on the port that connects to the service provider network.
To configure inner VLAN ID substitution:
Step...
1. Enter system view
2. Create a class and enter class view
Command...
traffic classifier classifier-name [ operator
{ and | or } ]

Match the specified inner VLAN IDs:
if-match customer-vlan-id vlan-id-list

Match the specified inner VLAN tag
priorities:
if-match customer-dot1p 8021p-list
quit
traffic behavior behavior-nameS
remark dot1p 8021p
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit

Enter Ethernet interface view:
interface interface-type interface-number

Enter port group view:
port-group manual port-group-name
qinq enable
qos apply policy policy-name inbound
Command...
system-view
traffic classifier classifier-name [
operator and ]
151
Remarks
Required
By default, the operator of
a class is AND
Required
Use either command
—
Required
Required
—
Required
Required
—
Required
Use either command
Required
Required
Remarks
—
Required
By default, the
operator of a class is
AND