Step...
1.
Enter system view
2.
Enter
Ethernet
interface
view or port
group view
3.
Enable LLDP polling and set the
polling interval
Configuring advertisable TLVs
To configure the advertisable LLDPDU TLVs on the specified port or ports:
Step...
1.
Enter system view
2.
Enter
Ethernet
interface
view or
port group
view
3.
Configure the advertisable
TLVs (Layer 2 Ethernet
interface view or port group
view)
4.
Configure the advertisable
TLVs (Layer 3 Ethernet
interface view)
Configuring the management address TLV and its encoding
format
LLDP encodes management addresses in numeric or character string format in management address TLVs.
Enter Layer 2/Layer 3
Ethernet interface view
Enter port group view
Command...
system-view
Enter Layer
2/Layer 3
interface interface-type interface-number
Ethernet
interface view
Enter port
port-group manual port-group-name
group view
lldp tlv-enable { basic-tlv { all | port-
description | system-capability | system-
description | system-name } | dot1-tlv { all
|port-vlan-id | protocol-vlan-id [ vlan-id ] |
vlan-name [ vlan-id ] } | dot3-tlv { all |
link-aggregation | mac-physic | max-
frame-size | power } | med-tlv { all |
capability | inventory | location-id { civic-
address device-type country-code { ca-type
ca-value }&<1–10> | elin-address tel-
number } | network-policy | power-over-
ethernet } }
lldp tlv-enable { basic-tlv { all | port-
description | system-capability | system-
description | system-name } | dot3-tlv { all
| link-aggregation | mac-physic | max-
frame-size | power } | med-tlv { all |
capability | inventory | location-id { civic-
address device-type country-code { ca-type
ca-value }&<1-10> | elin-address tel-
number } | power-over-ethernet } }
Command...
system-view
interface interface-type interface-
number
port-group manual port-group-name
lldp check-change-interval interval
197
Remarks
—
Required
Use either command
Required
Disabled by default
Remarks
—
Required
Use either command
Optional
By default, all types of LLDP
TLVs except location
identification TLVs are
advertisable on a Layer 2
Ethernet port
Optional
By default, all types of LLDP
TLVs, except IEEE 802.1
organizationally specific
TLVs, network policy TLVs,
and location identification
TLVs, are advertisable on a
Layer 3 Ethernet port