Step...
1.
Enter system view
2.
Enter
interface or
port group
view
3.
Enable No Agreement Check
No Agreement Check configuration example
Network requirements
1.
As shown in
Device A connects to a third-party device that has a different spanning tree implementation. Both
devices are in the same region.
The third-party device (Device B) is the regional root bridge, and Device A is the downstream device.
Figure 22 No Agreement Check configuration
GE1/0/1
Device A
Root port
Configuration procedure
2.
# Enable No Agreement Check on GigabitEthernet 1/0/1 of Device A.
<DeviceA> system-view
[DeviceA] interface gigabitethernet 1/0/1
[DeviceA-GigabitEthernet1/0/1] stp no-agreement-check
Configuring protection functions
A spanning tree device supports the following protection functions:
BPDU guard
Root guard
Loop guard
TC-BPDU guard
BPDU drop
Configuration prerequisites
The spanning tree feature has been correctly configured on the device.
Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view
Enter port group view
Figure
22:
GE1/0/1
Designated port
Command...
system-view
interface interface-type
interface-number
port-group manual port-
group-name
stp no-agreement-check
Root bridge
Device B
82
Remarks
—
Required
Use either command
Required
Disabled by default