Configuration Procedure - HP A5830 Configuration Manual

Figure 3 Network diagram for MAC Information configuration
Host A
192.168.1.1/24
Host B
192.168.1.2/24

Configuration procedure

Configure Device to send Syslog messages to Host B.
1.
For more information, see Network Management and Monitoring Configuration Guide.
Enable MAC Information.
2.
# Enable MAC Information on Device.
<Device> system-view
[Device] mac-address information enable
# Configure MAC Information mode as Syslog.
[Device] mac-address information mode syslog
# Enable MAC Information on GigabitEthernet 1/0/1.
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] mac-address information enable added
[Device-GigabitEthernet1/0/1] mac-address information enable deleted
[Device-GigabitEthernet1/0/1] quit
# Set the MAC Information queue length to 100.
[Device] mac-address information queue-length 100
# Set the interval for sending Syslog or trap messages to 20 seconds.
[Device] mac-address information interval 20
Device
GE1/0/1
GE1/0/2
GE1/0/3
Server
192.168.1.3/24
25