HP A5830 Configuration Manual page 129

Figure 39 Network diagram for protocol-based VLAN configuration
L2 Switch A
IPv4 Host A
VLAN 100
Configuration consideration
Create VLANs 100 and 200. Associate VLAN 100 with IPv4, and associate VLAN 200 with IPv6.
Configure protocol-based VLANs to isolate IPv4 traffic and IPv6 traffic at Layer 2.
Configuration guidelines
Protocol-based VLAN configuration only applies to hybrid ports.
Configuration procedure
Configure Device.
1.
# Create VLAN 100, and assign port GigabitEthernet 1/0/1 1 to VLAN 100.
<Device> system-view
[Device] vlan 100
[Device-vlan100] description protocol VLAN for IPv4
[Device-vlan100] port gigabitethernet 1/0/11
[Device-vlan100] quit
# Create VLAN 200, and assign port GigabitEthernet 1/0/12 to VLAN 200.
[Device] vlan 200
[Device-vlan200] description protocol VLAN for IPv6
[Device-vlan200] port gigabitethernet 1/0/12
# Create an IPv6 protocol template in the view of VLAN 200, and create an IPv4 protocol template in the
view of VLAN 100.
[Device-vlan200] protocol-vlan 1 ipv6
[Device-vlan200] quit
[Device] vlan 100
[Device-vlan100] protocol-vlan 1 ipv4
[Device-vlan100] quit
VLAN 100
IPv4 Server IPv6 Server
GE1/0/11
GE1/0/12
GE1/0/1 GE1/0/2
Device
IPv6 Host A IPv4 Host B
VLAN 200 VLAN 100
VLAN 200
L2 Switch B
IPv6 Host B
VLAN 200
122