Displaying And Maintaining Lldp - HP A5830 Configuration Manual

LLDP traps are sent periodically, and the interval is configurable. To prevent excessive LLDP traps from
being sent when the topology is unstable, set a trap transmit interval for LLDP.
To configure LLDP trapping:
Step...
1. Enter system view
2. Enter
Ethernet
interface
view or
port
group
view
3. Enable LLDP trapping
4. Return to system view
5. Set the LLDP trap transmit interval

Displaying and maintaining LLDP

Task...
Display the global LLDP
information or the information
contained in the LLDP TLVs to be
sent through a port
Display the information contained
in the LLDP TLVs sent from
neighboring devices
Display LLDP statistics
Display LLDP status of a port
Display types of advertisable
optional LLDP TLVs
Command...
system-view
Enter Layer 2/Layer 3
interface interface-type interface-
Ethernet interface
number
view
Enter port group view port-group manual port-group-name
lldp notification remote-change enable
quit
lldp timer notification-interval interval
Command...
display lldp local-information [ global | interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
display lldp neighbor-information [ brief | interface
interface-type interface-number [ brief ] | list [
system-name system-name ] ] [ | { begin | exclude
| include } regular-expression ]
display lldp statistics [ global | interface interface-
type interface-number ] [ | { begin | exclude |
include } regular-expression ]
display lldp status [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
display lldp tlv-config [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
200
Remarks
—
Required
Use either command
Required
Disabled by default
—
Optional
5 seconds by default
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view