Configuring One-To-One Vlan Mapping - HP A5830 Configuration Manual

Configuring one-to-one VLAN mapping

Perform one-to-one VLAN mapping on wiring-closet switches (see
and traffic type.
Perform these tasks to configure one-to-one VLAN mapping:
Task
Configuring an uplink policy
Configuring a downlink policy
Configuring the customer-side port
Configuring the network-side port
Configuration prerequisites
Create CVLANs and SVLANs, and plan CVLAN-SVLAN mappings.
Configuring an uplink policy
To configure an uplink policy to map each CVLAN to a unique SVLAN:
Step...
1. Enter system view
2. Create a class and enter class
view
3. Specify a CVLAN as the
match criterion
4. Return to system view
5. Create a traffic behavior and
enter traffic behavior view
6. Configure an SVLAN marking
action
7. Return to system view
8. Create a QoS policy and
enter QoS policy view
9. Associate the class with the
behavior to map the CVLAN
to the SVLAN
Configuring a downlink policy
To configure a downlink policy to map SVLANs back to CVLANs:
Step...
1. Enter system view
2. Create a class and enter class
view
3. Configure an SVLAN as the
match criterion
Description
Creates CVLAN-to-SVLAN mappings (required)
Creates SVLAN-to-CVLAN mappings (required)
Configures settings required for one-to-one VLAN mapping (required)
Configures VLAN settings required for normal communication
(required)
Command...
system-view
traffic classifier tcl-name [ operator
{ and | or } ]
if-match customer-vlan-id vlan-id
quit
traffic behavior behavior-name
remark service-vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Command...
system-view
traffic classifier tcl-name [ operator
{ and | or } ]
if-match service-vlan-id vlan-id
170
Figure 55) to isolate traffic by both user
Remarks
—
Required
Repeat these steps to configure
one class for each CVLAN
Required
Repeat these steps to configure
one behavior for each SVLAN
Required
Required
Repeat this step to create other
CVLAN-to-SVLAN mappings
Remarks
—
Required
Repeat these steps to configure
one class for each SVLAN