HP A5830 Configuration Manual page 182

Task
Configuring the network-side port
Configuration prerequisites
Create VLANs, and plan CVLAN-to-SVLAN mappings.
Configuring an uplink policy
To configure an uplink policy to insert an SVLAN to VLAN tagged packets:
Step...
1. Enter system view
2. Create a class and enter class
view
3. Configure CVLAN match
criteria
4. Return to system view
5. Create a traffic behavior and
enter traffic behavior view
6. Add a VLAN nest action to
insert an outer VLAN tag into
the incoming packets from the
CVLAN or CVLANs
7. Return to system view
8. Create a QoS policy and
enter QoS policy view
9. Associate the class with the
behavior
Configuring the customer-side port
To configure the customer-side port:
Step...
1. Enter system view
2. Enter Ethernet interface
view
3. Configure the port as a
hybrid port
4. Assign the port to the
SVLANs as an
untagged member
5. Enable basic QinQ
Description
Configures VLAN and other settings required for one-to-two
VLAN mapping (required)
Command...
system-view
traffic classifier tcl-name [ operator
or ]
if-match customer-vlan-id { vlan-
id-list | vlan-id1 to vlan-id2 }
quit
traffic behavior behavior-name
nest top-most vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Command...
system-view
interface interface-type
interface-number
port link-type hybrid
port hybrid vlan vlan-id-
list untagged
qinq enable
175
Remarks
—
Required
Required
Required
Required
Repeat these steps to configure
one behavior for each SVLAN
Required
Required
Repeat this step to create class-
behavior associations for other
CVLANs
Remarks
—
—
Required
The default link type of an Ethernet port is access
Required
By default, a hybrid port is in only VLAN 1
Required
By default, basic QinQ is disabled on all ports